欢迎来到代码驿站!

Android代码

当前位置:首页 > 移动开发 > Android代码

Android系统关机的全流程解析

时间:2020-10-03 10:13:25|栏目:Android代码|点击:

在PowerManager的API文档中,给出了一个关机/重启接口:
public void reboot (String reason)

对于这个接口的描述很简单,就是几句话。
接口的作用就是重启设备,而且,就算重启成功了也没有返回值。
需要包含REBOOT权限,也就是android.permission.REBOOT
唯一参数reason代表需要的特定重启模式,比如recovery,当然也可以为null。

一、上层空间
1.frameworks/base/core/java/android/os/PowerManager.java

/** 
 * Reboot the device. Will not return if the reboot is 
 * successful. Requires the {@link android.Manifest.permission#REBOOT} 
 * permission. 
 * 
 * @param reason code to pass to the kernel (e.g., "recovery") to 
 *        request special boot modes, or null. 
 */ 
public void reboot(String reason) 
{   
  try { 
    mService.reboot(reason); 
  } catch (RemoteException e) { 
  }   
}  

mService为IPowerManager Binder接口服务。

/** 
 * {@hide} 
 */ 
public PowerManager(IPowerManager service, Handler handler) 
{ 
  mService = service; 
  mHandler = handler; 
} 

2.frameworks/base/core/java/android/os/IPowerManager.aidl

interface IPowerManager 
{ 
... 
void reboot(String reason); 
... 
} 

3.frameworks/base/services/java/com/android/server/PowerManagerService.java

/**  
 * Reboot the device immediately, passing 'reason' (may be null) 
 * to the underlying __reboot system call. Should not return. 
 */ 
public void reboot(String reason) 
{   
  mContext.enforceCallingOrSelfPermission(android.Manifest.permission.REBOOT, null); 
 
  if (mHandler == null || !ActivityManagerNative.isSystemReady()) { 
    throw new IllegalStateException("Too early to call reboot()"); 
  }   
 
  final String finalReason = reason; 
  Runnable runnable = new Runnable() { 
    public void run() { 
      synchronized (this) { 
        ShutdownThread.reboot(getUiContext(), finalReason, false); 
      }   
 
    }   
  };   
  // ShutdownThread must run on a looper capable of displaying the UI. 
  mHandler.post(runnable); 
 
  // PowerManager.reboot() is documented not to return so just wait for the inevitable. 
  synchronized (runnable) { 
    while (true) { 
      try { 
        runnable.wait(); 
      } catch (InterruptedException e) {  
      }   
    }   
  }   
} 

4.frameworks/base/services/java/com/android/server/pm/ShutdownThread.java

/** 
 * Request a clean shutdown, waiting for subsystems to clean up their 
 * state etc. Must be called from a Looper thread in which its UI 
 * is shown. 
 * 
 * @param context Context used to display the shutdown progress dialog. 
 * @param reason code to pass to the kernel (e.g. "recovery"), or null. 
 * @param confirm true if user confirmation is needed before shutting down. 
 */ 
public static void reboot(final Context context, String reason, boolean confirm) { 
  mReboot = true; 
  mRebootSafeMode = false; 
  mRebootReason = reason; 
  shutdownInner(context, confirm); 
} 

这里说明是需要重启,且不是安全模式,重启参数为传递下来的reason,shutdownInner的confirm参数是用来设置是否有确认提示框的,通过reboot接口调用重启是没有的,为false。
重启的实现在run()中,因为ShutdownThread是Thread的扩展,所以run会自动运行。

/** 
 * Makes sure we handle the shutdown gracefully. 
 * Shuts off power regardless of radio and bluetooth state if the alloted time has passed. 
 */  
public void run() { 
  BroadcastReceiver br = new BroadcastReceiver() { 
    @Override public void onReceive(Context context, Intent intent) { 
      // We don't allow apps to cancel this, so ignore the result. 
      actionDone(); 
    } 
  }; 
 
  /* 
   * Write a system property in case the system_server reboots before we 
   * get to the actual hardware restart. If that happens, we'll retry at 
   * the beginning of the SystemServer startup. 
   */  
  {   
    String reason = (mReboot ? "1" : "0") + (mRebootReason != null ? mRebootReason : ""); 
    SystemProperties.set(SHUTDOWN_ACTION_PROPERTY, reason); 
  } 
 
  /* 
   * If we are rebooting into safe mode, write a system property 
   * indicating so. 
   */  
  if (mRebootSafeMode) { 
    SystemProperties.set(REBOOT_SAFEMODE_PROPERTY, "1"); 
  } 
  ... 
  rebootOrShutdown(mReboot, mRebootReason); 
}  

在重启前会将重启原因写入sys.shutdown.requested,如果没有则为空,如果是安全模式还会将persist.sys.safemode置1,之后会进行一些关机前的预处理,关闭ActivityManager以及MountService,最终调用rebootOrShutdown进行关机操作。

 

  /** 
   * Do not call this directly. Use {@link #reboot(Context, String, boolean)} 
   * or {@link #shutdown(Context, boolean)} instead. 
   * 
   * @param reboot true to reboot or false to shutdown 
   * @param reason reason for reboot 
   */ 
  public static void rebootOrShutdown(boolean reboot, String reason) { 
    if (reboot) { 
      Log.i(TAG, "Rebooting, reason: " + reason);  
      try { 
        PowerManagerService.lowLevelReboot(reason); 
      } catch (Exception e) { 
        Log.e(TAG, "Reboot failed, will attempt shutdown instead", e); 
      }  
    } else if (SHUTDOWN_VIBRATE_MS > 0) { 
      // vibrate before shutting down 
      Vibrator vibrator = new SystemVibrator(); 
      try { 
        vibrator.vibrate(SHUTDOWN_VIBRATE_MS); 
      } catch (Exception e) { 
        // Failure to vibrate shouldn't interrupt shutdown. Just log it. 
        Log.w(TAG, "Failed to vibrate during shutdown.", e); 
      }   
         
      // vibrator is asynchronous so we need to wait to avoid shutting down too soon. 
      try { 
        Thread.sleep(SHUTDOWN_VIBRATE_MS); 
      } catch (InterruptedException unused) { 
      }   
    }   
       
    // Shutdown power 
    Log.i(TAG, "Performing low-level shutdown..."); 
    PowerManagerService.lowLevelShutdown(); 
  } 
} 

如果确认重启,则调用PowerManagerService的lowLevelReboot函数,参数就是传递下来的reason,稍后分析。如果不是重启,即mReboot=false,那就是需要关机了,在shutdown函数中就能够知道。

/** 
 * Request a clean shutdown, waiting for subsystems to clean up their 
 * state etc. Must be called from a Looper thread in which its UI 
 * is shown. 
 * 
 * @param context Context used to display the shutdown progress dialog. 
 * @param confirm true if user confirmation is needed before shutting down. 
 */ 
public static void shutdown(final Context context, boolean confirm) { 
  mReboot = false; 
  mRebootSafeMode = false; 
  shutdownInner(context, confirm); 
} 

关机的时候需要震动,就是这里了SHUTDOWN_VIBRATE_MS,默认的定义是500ms。但是在代码上看,无论如何,最后都会调用一下lowLevelShutdown函数,也就是关机。逻辑上,这里可能是个问题,但是实际中,如果重启操作能够调用成功的话,整个系统都重启了,后边的代码当然不可能执行到了。
目光转回PowerManagerService
4.frameworks/base/services/java/com/android/server/PowerManagerService.java

/**  
 * Low-level function to reboot the device. 
 * 
 * @param reason code to pass to the kernel (e.g. "recovery"), or null. 
 * @throws IOException if reboot fails for some reason (eg, lack of 
 *     permission) 
 */ 
public static void lowLevelReboot(String reason) throws IOException { 
  nativeReboot(reason); 
}  
 
/**  
 * Low-level function turn the device off immediately, without trying 
 * to be clean. Most people should use 
 * {@link com.android.server.pm.internal.app.ShutdownThread} for a clean shutdown. 
 */ 
public static void lowLevelShutdown() { 
  nativeShutdown(); 
} 

 

很熟悉的字样native,是JNI调用了:

private static native void nativeShutdown(); 
private static native void nativeReboot(String reason) throws IOException; 

5.frameworks/base/services/jni/com_android_server_PowerManagerService.cpp

static JNINativeMethod gPowerManagerServiceMethods[] = {  
  /* name, signature, funcPtr */ 
  ... 
  { "nativeShutdown", "()V", 
      (void*) nativeShutdown }, 
  { "nativeReboot", "(Ljava/lang/String;)V", 
      (void*) nativeReboot }, 
  ... 
}; 

这两个好哥俩的实现也是在一起的:

static void nativeShutdown(JNIEnv *env, jobject clazz) { 
  android_reboot(ANDROID_RB_POWEROFF, 0, 0); 
} 
 
static void nativeReboot(JNIEnv *env, jobject clazz, jstring reason) { 
  if (reason == NULL) { 
    android_reboot(ANDROID_RB_RESTART, 0, 0); 
  } else { 
    const char *chars = env->GetStringUTFChars(reason, NULL); 
    android_reboot(ANDROID_RB_RESTART2, 0, (char *) chars); 
    env->ReleaseStringUTFChars(reason, chars); // In case it fails. 
  } 
  jniThrowIOException(env, errno); 
} 

可以看到无论是关机还是重启,都是调用android_reboot来实现的,只是参数不一样而已。

6.system/core/libcutils/android_reboot.c

int android_reboot(int cmd, int flags, char *arg) 
{ 
  int ret = 0; 
  int reason = -1; 
 
#ifdef RECOVERY_PRE_COMMAND 
  if (cmd == (int) ANDROID_RB_RESTART2) { 
    if (arg && strlen(arg) > 0) { 
      char cmd[PATH_MAX]; 
      sprintf(cmd, RECOVERY_PRE_COMMAND " %s", arg); 
      system(cmd); 
    } 
  } 
#endif 
 
  if (!(flags & ANDROID_RB_FLAG_NO_SYNC)) 
    sync(); 
 
  if (!(flags & ANDROID_RB_FLAG_NO_REMOUNT_RO)) 
    remount_ro(); 
 
  switch (cmd) { 
    case ANDROID_RB_RESTART: 
      reason = RB_AUTOBOOT; 
      break; 
 
    case ANDROID_RB_POWEROFF: 
      ret = reboot(RB_POWER_OFF); 
      return ret; 
 
    case ANDROID_RB_RESTART2: 
      // REBOOT_MAGIC 
      break; 
 
    default: 
      return -1; 
  } 
 
#ifdef RECOVERY_PRE_COMMAND_CLEAR_REASON 
  reason = RB_AUTOBOOT; 
#endif 
 
  if (reason != -1) 
    ret = reboot(reason); 
  else 
    ret = __reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, 
              LINUX_REBOOT_CMD_RESTART2, arg); 
 
  return ret; 
} 

以reboot recovery为例,arg即为recovery,所在在第五步的时候会传入ANDROID_RB_RESTART2。到了android_reboot函数中,会看到这样的定义#ifdef RECOVERY_PRE_COMMAND,即属于重启前会执行的命令,如果定义了就会执行。
下面也是做了一些关机重启前的预处理工作,sync()作用是将缓存中的信息写入磁盘,以免程序异常结束导致文件被损坏,linux系统关机前会做几次这样的动作;而remount_ro()作用是通过调用emergency_remount()强制将文件系统挂载为只读,不再允许任何写入操作,同时会通过检查/proc/mounts的设备状态来确认是否当前的所有写入工作已经完成,这个检查过程是阻塞操作。
接下来才是对参数的解析处理:
1)普通重启 ANDROID_RB_RESTART, reason = RB_AUTOBOOT;
2)关机 ANDROID_RB_POWEROFF, 无需reason,直接调用reboot进行关机;
3)带参数的特殊重启 ANDROID_RB_RESTART2, reason 将为默认值 -1
这里又出现一个#ifdef RECOVERY_PRE_COMMAND_CLEAR_REASON,如果定义了它,则无论上层传下来的参数是什么样的,最终都只是普通重启而已。定义它的方式是在BoardConfig.mk中加入TARGET_RECOVERY_PRE_COMMAND_CLEAR_REASON := true,应该有厂商会喜欢这么做的,毕竟除了普通重启,都可能带给用户一定的风险。
最后会对reason进行一个检测,那么通过上边的分析,其实只有带参数的特殊重启才会为-1,而不等于-1的情况中有普通重启和关机,而关机已经自行解决了……所以,不等于-1的情况到了这里也只有普通重启了。最终这里就是区分普通重启与特殊重启的地方了。这里再插入一个问题,其他的几个cmd都是什么值呢?答案在bionic/libc/include/sys/reboot.h中:

#define RB_AUTOBOOT   LINUX_REBOOT_CMD_RESTART 
#define RB_HALT_SYSTEM LINUX_REBOOT_CMD_HALT 
#define RB_ENABLE_CAD  LINUX_REBOOT_CMD_CAD_ON 
#define RB_DISABLE_CAD LINUX_REBOOT_CMD_CAD_OFF 
#define RB_POWER_OFF  LINUX_REBOOT_CMD_POWER_OFF 

而,LINUX_REBOOT_XXXX之类的在bionic/libc/kernel/common/linux/reboot.h中:

#define LINUX_REBOOT_MAGIC1 0xfee1dead 
#define LINUX_REBOOT_MAGIC2 672274793 
/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */ 
#define LINUX_REBOOT_MAGIC2A 85072278 
#define LINUX_REBOOT_MAGIC2B 369367448 
#define LINUX_REBOOT_MAGIC2C 537993216 
#define LINUX_REBOOT_CMD_RESTART 0x01234567 
/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */ 
#define LINUX_REBOOT_CMD_HALT 0xCDEF0123 
#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF 
#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000 
#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC 
/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */ 
#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4 
#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2 
#define LINUX_REBOOT_CMD_KEXEC 0x45584543 

至于为什么他们是这样奇怪的值这个问题,我只能说他们是magic number,魔法嘛,本来就是正常人不能够理解的,所以~~~放过他们吧,只要知道他们没有是-1的就OK啦。
先来看reboot函数,按照往常的经验,reboot最终一定会调用到__reboot的。

7.bionic/libc/unistd/reboot.c

int reboot (int mode)  
{ 
  return __reboot( LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, mode, NULL ); 
} 

Bingo!果然是这样,如此说来reboot(reason) -> reboot(RB_AUTOBOOT) -> __reboot( LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, LINUX_REBOOT_CMD_RESTART, NULL ),要是直接这样写多好~~~免得绕这一层了。

二、KERNEL域
8.__reboot通过syscall来到内核
这里用一些篇幅简要介绍syscall,以后遇到类似的东西更好追踪一些。
第七步中的__reboot在arm架构的实现是这样的(bionic/libc/arch-arm/syscalls/__reboot.S)

ENTRY(__reboot) 
  .save  {r4, r7}  
  stmfd  sp!, {r4, r7} 
  ldr   r7, =__NR_reboot 
  swi   #0  
  ldmfd  sp!, {r4, r7} 
  movs  r0, r0 
  bxpl  lr  
  b    __set_syscall_errno 
END(__reboot) 

可以看出来,这里将__reboot的实现映射到了__NR_reboot, 而在bionic/libc/sys/linux-syscalls.h能够找到:

#define __NR_reboot            (__NR_SYSCALL_BASE + 88) 

其被指定了一个固定的偏移量,在被调用的时候就是通过这个偏移量去内核中寻找对应的入口的,由此可见,内核中一定有着相同的定义,否则将不能成功调用。内核中对syscall偏移量的定义在内核源码中的arch/arm/include/asm/unistd.h,相关信息完全一致。
已经找到了内核中的对应映射,那么下一步就要去找寻真正的实现函数了,在include/asm-generic/unistd.h中可以找到内核对__NR_reboot的syscall函数映射,即

/* kernel/sys.c */ 
#define __NR_setpriority 140 
__SYSCALL(__NR_setpriority, sys_setpriority) 
#define __NR_getpriority 141 
__SYSCALL(__NR_getpriority, sys_getpriority) 
#define __NR_reboot 142 
__SYSCALL(__NR_reboot, sys_reboot) 

同时,能够发现如此温馨的一幕,内核已经指引我们下一步该去哪里寻找sys_reboot,即kernel/sys.c。

9.kernel/sys.c
在进入这个文件前,我们先去include/linux/syscalls.h中查看一下sys_reboot的定义:

asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, 
        void __user *arg); 

与__reboot的调用参数一致。
进入sys.c文件后,并没有找到名为sys_reboot的函数,而通过仔细查找,发现一个很有趣的函数,其定义为SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd, void __user *, arg),对比__reboot的参数,能够符合。究竟是不是这个函数?
同样在include/linux/syscalls.h文件中,能够找到这样几个定义:

#define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__) 
#define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__) 
#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__) 
#define SYSCALL_DEFINE4(name, ...) SYSCALL_DEFINEx(4, _##name, __VA_ARGS__) 
#define SYSCALL_DEFINE5(name, ...) SYSCALL_DEFINEx(5, _##name, __VA_ARGS__) 
#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__) 
... 
 
#define SYSCALL_DEFINEx(x, sname, ...)       \ 
  __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) 
... 
 
#define __SYSCALL_DEFINEx(x, name, ...)         \ 
  asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__)) 

整合后等价于:

#define SYSCALL_DEFINE4(name, ...) \ 
  asmlinkage long sys##_name(__SC_DECL##4(__VA_ARGS__)) 

这样就不难看出,SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd, void __user *, arg)就是sys_reboot,也就是上层调用的__reboot的最终实现。函数实现如下:

/* 
 * Reboot system call: for obvious reasons only root may call it, 
 * and even root needs to set up some magic numbers in the registers 
 * so that some mistake won't make this reboot the whole machine. 
 * You can also set the meaning of the ctrl-alt-del-key here. 
 * 
 * reboot doesn't sync: do that yourself before calling this. 
 */ 
SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd, 
    void __user *, arg) 
{ 
  char buffer[256]; 
  int ret = 0; 
 
  /* We only trust the superuser with rebooting the system. */ 
  if (!capable(CAP_SYS_BOOT)) 
    return -EPERM; 
 
  /* For safety, we require "magic" arguments. */ 
  if (magic1 != LINUX_REBOOT_MAGIC1 || 
    (magic2 != LINUX_REBOOT_MAGIC2 && 
          magic2 != LINUX_REBOOT_MAGIC2A && 
      magic2 != LINUX_REBOOT_MAGIC2B && 
          magic2 != LINUX_REBOOT_MAGIC2C)) 
    return -EINVAL; 
 
  /* Instead of trying to make the power_off code look like 
   * halt when pm_power_off is not set do it the easy way. 
   */ 
  if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off) 
    cmd = LINUX_REBOOT_CMD_HALT; 
 
  mutex_lock(&reboot_mutex); 
  switch (cmd) { 
  case LINUX_REBOOT_CMD_RESTART: 
    kernel_restart(NULL); 
    break; 
 
  case LINUX_REBOOT_CMD_CAD_ON: 
    C_A_D = 1; 
    break; 
 
  case LINUX_REBOOT_CMD_CAD_OFF: 
    C_A_D = 0; 
    break; 
 
  case LINUX_REBOOT_CMD_HALT: 
    kernel_halt(); 
    do_exit(0); 
    panic("cannot halt"); 
 
  case LINUX_REBOOT_CMD_POWER_OFF: 
    kernel_power_off(); 
    do_exit(0); 
    break; 
 
  case LINUX_REBOOT_CMD_RESTART2: 
    if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) { 
      ret = -EFAULT; 
      break; 
    } 
    buffer[sizeof(buffer) - 1] = '\0'; 
 
    kernel_restart(buffer); 
    break; 
 
#ifdef CONFIG_KEXEC 
  case LINUX_REBOOT_CMD_KEXEC: 
    ret = kernel_kexec(); 
    break; 
#endif 
 
#ifdef CONFIG_HIBERNATION 
  case LINUX_REBOOT_CMD_SW_SUSPEND: 
    ret = hibernate(); 
    break; 
#endif 
 
  default: 
    ret = -EINVAL; 
    break; 
  } 
  mutex_unlock(&reboot_mutex); 
  return ret; 
} 

在此函数中,首先会检测权限问题,只有超级用户才可以执行重启系统的操作:

/* We only trust the superuser with rebooting the system. */ 
if (!capable(CAP_SYS_BOOT)) 
  return -EPERM; 

否则将返回权限错误。对应的权限列表在include/linux/capability.h中,重启操作为22.
随后对magic number进行了校验:

/* For safety, we require "magic" arguments. */ 
if (magic1 != LINUX_REBOOT_MAGIC1 || 
  (magic2 != LINUX_REBOOT_MAGIC2 && 
        magic2 != LINUX_REBOOT_MAGIC2A && 
    magic2 != LINUX_REBOOT_MAGIC2B && 
        magic2 != LINUX_REBOOT_MAGIC2C)) 
  return -EINVAL; 

如果数据传输过程中没有发生错误的话,这里也当然不会有问题,所以只是一个安全性校验,基本不会发生错误。
之后有一个很有趣的检查,如果用户要求关机,而pm_power_off为空的话,就把用户的关机命令转换为挂起:

/* Instead of trying to make the power_off code look like 
 * halt when pm_power_off is not set do it the easy way. 
 */ 
if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off) 
  cmd = LINUX_REBOOT_CMD_HALT; 

在arch/arm/kernel/process.c中可以找到它的定义:

/* 
 * Function pointers to optional machine specific functions 
 */ 
void (*pm_power_off)(void); 
EXPORT_SYMBOL(pm_power_off); 

好的,只是一个函数指针,而且做了全局操作,整个kernel都可以调用它。以高通msm7x30为例,在arch/arm/mach-msm/pm2.c中对这个函数指针进行了赋值:

pm_power_off = msm_pm_power_off; 

msm_pm_power_off的具体实现就不再跟踪了,各家的都不一样,跟下去没有太大意义。现在只要知道,我分析的这个kernel是给了这个函数指针赋值的,所以不为空,关机命令将正常执行。
接下来就是这个函数的正题了,对用户命令进行解析操作,同时这个过程是用reboot_mutex互斥锁来进行保护的,以保证同一时间只可能有一个解析过程,避免冲突。
下边贴出所有关机重启相关的命令定义:

/* 
 * Commands accepted by the _reboot() system call. 
 *    
 * RESTART   Restart system using default command and mode. 
 * HALT    Stop OS and give system control to ROM monitor, if any. 
 * CAD_ON   Ctrl-Alt-Del sequence causes RESTART command. 
 * CAD_OFF   Ctrl-Alt-Del sequence sends SIGINT to init task. 
 * POWER_OFF  Stop OS and remove all power from system, if possible. 
 * RESTART2  Restart system using given command string. 
 * SW_SUSPEND Suspend system using software suspend if compiled in. 
 * KEXEC    Restart system using a previously loaded Linux kernel 
 */    
     
#define LINUX_REBOOT_CMD_RESTART  0x01234567 
#define LINUX_REBOOT_CMD_HALT    0xCDEF0123 
#define LINUX_REBOOT_CMD_CAD_ON   0x89ABCDEF 
#define LINUX_REBOOT_CMD_CAD_OFF  0x00000000  
#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC 
#define LINUX_REBOOT_CMD_RESTART2  0xA1B2C3D4 
#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2 
#define LINUX_REBOOT_CMD_KEXEC   0x45584543 

注释中的说明很详细了,比较陌生的就是关于CAD,其实就是用来想用Ctrl+Alt+Del操作的;然后SW_SYSPEND是软件休眠;KEXEC就太高端了,属于内核的一个补丁,用来利用老内核重启,详细资料:http://www.ibm.com/developerworks/cn/linux/l-kexec/?ca=dwcn-newsletter-linux
以上这些只有前六个命令被Android系统所使用,为什么这么说,可以去看bionic/libc/include/sys/reboot.h,上边已经贴出了。LINUX_REBOOT_CMD_HALT虽有定义,但是也没有发现Android系统中哪里有调用,有高手找到的话,希望能够告知一下。最终的最终,能够用到的就只有三个:

  • RESTART
  • POWER_OFF
  • RESTART2

10.最终实现
重启调用的是kernel_restart,区别是参数是不是空,关机则调用kernel_power_off(),先看关机:

/** 
 * kernel_power_off - power_off the system 
 * 
 * Shutdown everything and perform a clean system power_off. 
 */ 
void kernel_power_off(void) 
{ 
  kernel_shutdown_prepare(SYSTEM_POWER_OFF); 
  if (pm_power_off_prepare) 
    pm_power_off_prepare(); 
  disable_nonboot_cpus(); 
  syscore_shutdown(); 
  printk(KERN_EMERG "Power down.\n"); 
  kmsg_dump(KMSG_DUMP_POWEROFF); 
  machine_power_off(); 
} 
EXPORT_SYMBOL_GPL(kernel_power_off); 

最了一系列准备工作,最终调用machine_power_off():

void machine_power_off(void) 
{   
  machine_shutdown(); 
  if (pm_power_off) 
    pm_power_off(); 
} 

之前找寻的pm_power_off在这里就有用处了,是关机的最后一步操作。关机完成,之后看下重启操作:

/** 
 * kernel_restart - reboot the system 
 * @cmd: pointer to buffer containing command to execute for restart 
 *   or %NULL 
 * 
 * Shutdown everything and perform a clean reboot. 
 * This is not safe to call in interrupt context. 
 */ 
void kernel_restart(char *cmd) 
{ 
  kernel_restart_prepare(cmd); 
  if (!cmd) 
    printk(KERN_EMERG "Restarting system.\n"); 
  else 
    printk(KERN_EMERG "Restarting system with command '%s'.\n", cmd); 
  kmsg_dump(KMSG_DUMP_RESTART); 
  machine_restart(cmd); 
} 
EXPORT_SYMBOL_GPL(kernel_restart); 

同样的套路,也是会进行一些准备工作,之后调用machine_restart(cmd), 如果是普通重启,那么中个cmd就为NULL,如果是特殊重启,那么这个cmd就是一层一层传递下来得那个arg了。

void machine_restart(char *cmd) 
{ 
  machine_shutdown(); 
  arm_pm_restart(reboot_mode, cmd); 
} 
... 
void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart; 
EXPORT_SYMBOL_GPL(arm_pm_restart); 

而还记得刚才的pm2.c吗?在那里同样对arm_pm_restart进行了指针赋值:

arm_pm_restart = msm_pm_restart; 

赋值的函数为msm_pm_init, 其调用为

late_initcall_sync(msm_pm_init); 

late_initcall_sync的启动优先级是最低的,为7。module_init其实是6的优先级,数字越大优先级越低。所以,这样推断的话,最终arm_pm_restart这个函数指针会指向msm_pm_restart。关于msm_pm_restart的具体实现也不细看了,跟前边说的一样,都是各家不一样,就几行代码:

static void msm_pm_restart(char str, const char *cmd) 
{     
  msm_rpcrouter_close(); 
  msm_proc_comm(PCOM_RESET_CHIP, &restart_reason, 0); 
 
  for (;;) 
    ; 
}  

但是细心的朋友可能会发现这里有一个restart_reason,这个并不是传递下来的参数。事实上,这个值已经在之前kernel_restart_prepare(cmd)的时候就已经设置好了。

void kernel_restart_prepare(char *cmd) 
{   
  blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd); 
  system_state = SYSTEM_RESTART; 
  usermodehelper_disable(); 
  device_shutdown(); 
  syscore_shutdown(); 
} 

就是blocking_notifier机制,这个操作在之前的shutdown关机操作中也有,且是同一个list,都是reboot_notifier_list。也很容易理解,就是将注册在reboot_notifier_list上的函数传入相关参数后执行,作为了解,看一下具体是怎么使用的:(arch/arm/mach-msm/pm2.c)

static int msm_reboot_call 
  (struct notifier_block *this, unsigned long code, void *_cmd) 
{   
  if ((code == SYS_RESTART) && _cmd) { 
    char *cmd = _cmd; 
    if (!strcmp(cmd, "bootloader")) { 
      restart_reason = 0x77665500; 
    } else if (!strcmp(cmd, "recovery")) { 
      restart_reason = 0x77665502; 
    } else if (!strcmp(cmd, "eraseflash")) { 
      restart_reason = 0x776655EF; 
    } else if (!strncmp(cmd, "oem-", 4)) { 
      unsigned code = simple_strtoul(cmd + 4, 0, 16) & 0xff; 
      restart_reason = 0x6f656d00 | code; 
    } else { 
      restart_reason = 0x77665501;  
    }   
  }     
  return NOTIFY_DONE; 
}       
     
static struct notifier_block msm_reboot_notifier = { 
  .notifier_call = msm_reboot_call, 
}; 
 
... 
 
static int __init msm_pm_init(void) 
{ 
... 
  register_reboot_notifier(&msm_reboot_notifier); 
... 
} 

OK,万事大吉,在kernel_restart_prepare的时候msm_reboot_call会被首先调用,这个函数的作用就是根据用户命令给restart_reason赋值,从而在之后调用msm_pm_restart的时候使用。这里我们发现在reboot的时候可以带的参数不仅有recovery,bootloader,还有eraseflash和oem-???,字面上看应该是用来擦除ROM和解锁之类的操作了。

三、关机怎么用?
本文的分析是由Android给出的reboot接口开始的,但是分析来分析去,回头想一想会发现,Android给出的接口reboot就真的只能重启而已,不能进行关机操作,可以在跟踪这个流程的过程中会发现,确实是有存在关机的相关接口的。那么关机该怎么用呢?
frameworks/base/services/java/com/android/serverBatteryService.java

private final void shutdownIfNoPower() { 
// shut down gracefully if our battery is critically low and we are not powered. 
// wait until the system has booted before attempting to display the shutdown dialog. 
if (mBatteryLevel == 0 && !isPowered() && ActivityManagerNative.isSystemReady()) { 
  Intent intent = new Intent(Intent.ACTION_REQUEST_SHUTDOWN); 
  intent.putExtra(Intent.EXTRA_KEY_CONFIRM, false); 
  intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK); 
  mContext.startActivity(intent); 
} 

上一篇:Android 如何使用log4j及注意事项

栏    目:Android代码

下一篇:Android View源码解读 DecorView与ViewRootImpl浅谈

本文标题:Android系统关机的全流程解析

本文地址:http://www.codeinn.net/misctech/6190.html

推荐教程

广告投放 | 联系我们 | 版权申明

重要申明:本站所有的文章、图片、评论等,均由网友发表或上传并维护或收集自网络,属个人行为,与本站立场无关。

如果侵犯了您的权利,请与我们联系,我们将在24小时内进行处理、任何非本站因素导致的法律后果,本站均不负任何责任。

联系QQ:914707363 | 邮箱:codeinn#126.com(#换成@)

Copyright © 2020 代码驿站 版权所有